Orlando Logo

Heavy Duty Two Stroke Engine Oil MSDS

Mainlube Superior Maintenance Lubricants Pty Ltd

14 Underwood Ave, Botany NSW, 2017

Ph 02-9700-0880. ACN No. 001 748 876 Fax 02-9700-0881.


STATEMENT OF HAZARDOUS NATURE

Non Hazardous According to Criteria of Worksafe Australia

MATERIAL SAFETY DATA SHEET MAINLUBE 130

MATERIAL SAFETY DATA SHEET MAINLUBE 130

Page 1 of 3 Nov-13

Page 1 of 3 Nov-13

IDENTIFICATION

Product Name: Mainlube 130

Chemical Name: Heavy Duty Two-Stroke Engine Oil..

Other Names: Not Applicable Manufacturer’s Product Code: 130

UN Number: None Assigned

Dangerous Goods Class None Assigned

Subsidiary Risk[s]: None Assigned

Hazchem Code: None Assigned

EPG NO: None Assigned

Poisons Schedule Number: None Assigned Toxic and Hazardous

Ingredients: None

Uses: Heavy Duty Two-Stroke Engine Oil.

PHYSICAL DESCRIPTION AND PROPERTIES

Colour: Blue.

Appearance: Blue Oily Liquid.

Form: Liquid

Boiling Point: >260°C.

Melting Point: Not Applicable

Vapour Pressure: Not Applicable.

Specific Gravity: kg/L @ 15.0°C: 0.871 Typical

Volatiles: Not Applicable

Evaporation Rate: Not Applicable

Vapour Density: Not Applicable.

Odour: Mineral Oil

Solubility in Water: Nil @ 25°C

FLASH POINT

Solvent: Not Applicable

Lubricant residue: >198°C

Flammability Limits : Not Applicable Auto ignition

Temperature: >450°C


130MSDS

Page 2 of 3

Chemical Name

CAS Number

Proportion

Nov-13

Highly refined mineral oils

64742-65-0

40-50%

(Does not contain PCB’s)

High Flash Petroleum Liquid

64742-47-8

10-20%

Polybutene

9003-28-50

20-30%

Proprietary Additive

Included on US

TSCA Inventory

< 10

Blue Dye

1330-20-7

74499-36-8

< 0.01

Page 2 of 3

Chemical Name

CAS Number

Proportion

Nov-13

Highly refined mineral oils

64742-65-0

40-50%

(Does not contain PCB’s)

High Flash Petroleum Liquid

64742-47-8

10-20%

Polybutene

9003-28-50

20-30%

Proprietary Additive

Included on US

TSCA Inventory

< 10

Blue Dye

1330-20-7

74499-36-8

< 0.01

INGREDIENTS


image


HEALTH HAZARD INFORMATION

HEALTH EFFECTS:

Acute:

Swallowed: If swallowed and person is conscious give water or milk. Ingestion or subsequent vomiting may result in its aspiration which could cause pneumonitis.

Skin: Prolonged or frequent contact may cause irritation or skin cracking. Eyes: May cause moderate eye irritation.

Inhaled: Vapour or mist at concentrations exceeding ACGIH TLV may be irritating to the respiratory tract.

Chronic:

LC 50: No Data

LD 50: No Data

FIRST AID:

Swallowed: Do not induce vomiting. Aspiration of the fluid may cause lung injury (pneumonitis). Call a Doctor immediately.

Skin: Wash thoroughly with soap and water.

Eyes: Flush with water for 15 minutes, at least with eyelids open.

Inhaled: If respiratory irritation occurs move person to fresh air. If irritation continues call a Doctor.

ADVICE TO DOCTOR: Refer First Aid above.

PRECAUTIONS FOR USE

Exposure Standards: The ACGIH TLV for mineral oil mists is 5mg/m³ for a

daily 8 hours exposure.

Engineering Controls: As for oil mists.

Personal Protection: Avoid prolonged or frequently repeated contact.

Wash

skin thoroughly with soap and water after contact. Use safety glasses and neoprene or nitrile rubber gloves for frequent contact.

Flammability: Product is not classed flammable. Flash Point greater than 190°C

Product may support combustion. Do not store with strong oxidants.

130MSDS

Page 3 of 3 Nov-13

Page 3 of 3 Nov-13

SAFE HANDLING INFORMATION

Storage and Transport: Store in steel or HDPE plastic drums.

Store away from strong oxidising agents. Refer Dangerous Goods Class 5:1.

Storage Temperature: Store in a cool dry place.

UN Class: None Assigned.

Packaging Group: None Assigned

UN Number: None Assigned

EPG Number: None Assigned

Correct Shipping Name: Heavy Duty Two-Stroke Engine Oil..

Spills and Disposals: Absorbents such as cat litter, clays and rags to clean

up spills. Dispose of absorbent in approved disposal containers.

Fire/Explosion Hazard: Not a fire hazard. Auto ignition temperature is in excess

of 450°C. Should fire occur, however, use dry chemical, foam or carbon dioxide to extinguish.

Decomposition Products: Incomplete Combustion may promote formation Oxides

of carbon, Nitrogen, Sulfur and Phosphorus.

Hazchem Code: Not Applicable

Extinguishant: Dry chemical, foam or carbon dioxide.

DANGER OF VIOLENT REACTION OR EXPLOSION: NO

Protective Clothing; Applicable to degree of fire.

Appropriate Measures; No Data

Evacuate; Not Usually

OTHER INFORMATION:

130 Two Stroke Engine Lube is not expected to present environmental problems other than those associated with oil spills.

High temperature thermal decomposition may promote formation Oxides of carbon, Nitrogen, Sulfur and Phosphorus.

CONTACT POINT:

Mr Steve Simmonds

Mainlube Superior Maintenance Lubricants Pty Ltd. 14 Underwood Ave, Botany. NSW, 2019, Australia Ph 02-9700-0880. Fax 02-9700-0881.

Mob 0412-644-244.

24 Hour Emergency Tel No. Above Mobile Phones Emergency Services Dial 000


We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.


130MSDS

Categories