Biostable Soluble Cutting Lubricant Additive MSDS
Mainlube Superior Maintenance Lubricants Pty Ltd
189-191 Botany Road Waterloo, NSW, 2017
Ph 02-9310-3433. ACN No. 001 748 876 Fax 02-9310-3503.
STATEMENT OF HAZARDOUS NATURE
Non Hazardous According to Criteria of Worksafe Australia
MATERIAL SAFETY DATA SHEET MAINLUBE 235
MATERIAL SAFETY DATA SHEET MAINLUBE 235
Page 1 of 3 Nov-13
Page 1 of 3 Nov-13
IDENTIFICATION
Product Name: Mainlube 235.
Chemical Name: Biostable Soluble Cutting Lubricant Additive.
Other Names: None Assigned. Manufacturer’s Product Code: 235.
UN Number: None Assigned.
Dangerous Goods Class None Assigned.
Subsidiary Risk[s]: None Assigned..
Hazchem Code: None Assigned.
EPG NO: None Assigned.
Poisons Schedule Number: None Assigned. Toxic and Hazardous
Ingredients: None.
Uses: Cutting Coolant Concentrate for machining all types of metals..
PHYSICAL DESCRIPTION AND PROPERTIES.
Colour: Clear Brown.
Appearance: As used milky white.
Form: Liquid.
Boiling Point: 110°C Mixed.
Melting Point: Not Applicable.
Vapour Pressure: Very Low. unmixed
Volatiles: None.
Evaporation Rate: No data.
Vapour Density: No Data.
Odour: Oily Organic Odour.
Solubility in Water: 100%
FLASH POINT
Lubricant residue: >160ºC.
Flammability Limits : Not Applicable. Auto ignition
Temperature: No Data.
Page 2 of 3 Nov-13
Page 2 of 3 Nov-13
INGREDIENTS
Chemical Name | CAS Number | Proportion |
Petroleum oil | 64742-64-9 | >60% |
Olefine Sulfide | No Data | <20% |
Sodium Sulfonate | No Data | <20% |
Alcohol esters of Natural oils | No Data | <10% |
HEALTH HAZARD INFORMATION
HEALTH EFFECTS:
Acute:
Swallowed: Harmful if swallowed. May cause nausea or vomiting. Skin: Mild irritant. Repeated exposure may cause dermatitis.
Eyes: Mild irritant.
Inhaled: If mist generate irritation to mucous membrane may occur.
Chronic:
LC 50: No Data.
LD 50: No Data.
FIRST AID:
Swallowed: Do not induce vomiting. Give milk or water to drink.
Call a physician.
Skin: Wash with soap and water. Remove contaminated clothing and wash before reuse. If irritation occurs seek medical attention.
Eyes: Flush with water for at least 15 minutes. Get medical attention if eye irritation develops or persists.
Inhaled: Remove to fresh air if adverse effects are observed.
FIRST AID FACILITIES: ADVICE TO DOCTOR:
Treat for mild alkalinity and for mineral oil affects.
PRECAUTIONS FOR USE
Exposure Standards: The ACGIH TLV for mineral oil mists is 5mg/m³ for a
daily 8 hours exposure.
Engineering Controls: As for oil mists.
Personal Protection: Avoid prolonged or frequently repeated contact.
Wash
skin thoroughly with soap and water after contact. Use safety glasses and neoprene or nitrile rubber gloves for frequent contact.
Flammability: Product is not classed flammable. Flash Point greater than 190°C
Product may support combustion. Do not store with strong oxidants.
Page 3 of 3 Nov-13
Page 3 of 3 Nov-13
SAFE HANDLING INFORMATION
Storage and Transport: Store in a dry area away from heat source
and naked flames. Store away from strong oxidants. No special precautions for transport.
Storage Temperature: Store in a cool dry place.
UN Class: None Assigned
Packaging Group: None Assigned
UN Number: None Assigned
EPG Number: Not Applicable.
Correct Shipping Name: Cooling System Corrosion Inhibitor Concentrate.
Spills and Disposals: Clean up residue for recycle. Refer to local authorities
for disposal.
Fire/Explosion Hazard: Not considered a hazard.
Decomposition Products: No Data.
Hazchem Code: None Assigned.
Extinguishant: Dry chemical, foam or carbon dioxide.
DANGER OF VIOLENT REACTION OR EXPLOSION: NO
Protective Clothing; No Data.
Appropriate Measures; No Data.
Evacuate; Not Normally.
CONTACT POINT:
Mr Steve Simmonds, Mr Rob Simmonds,
Mainlube Superior Maintenance Lubricants Pty Ltd. 189-191 Botany Road Waterloo, NSW, 2017, Australia Ph 02-9310-3433. Fax 02-9310-3503.
Mob 0412-644-244, Mob 0411-243-150.
24 Hour Emergency Tel No. Above Mobile Phones Emergency Services Dial 000
We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.
We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.