Orlando Logo

Synthetic Hi Temperature Grease MSDS

Mainlube Superior Maintenance Lubricants Pty Ltd

189-191 Botany Road Waterloo, NSW, 2017

Ph 02-9310-3433. ACN No. 001 748 876 Fax 02-9310-3503.


STATEMENT OF HAZARDOUS NATURE

Non Hazardous According to Criteria of Worksafe Australia

MATERIAL SAFETY DATA SHEET MAINLUBE 315

MATERIAL SAFETY DATA SHEET MAINLUBE 315

Page 1 of 3 Nov-13

Page 1 of 3 Nov-13

IDENTIFICATION

Product Name: Mainlube 315

Chemical Name: Synthetic Hi-Temperature Grease.

Other Names: Not Applicable Manufacturer’s Product Code: 315

UN Number: None Assigned

Dangerous Goods Class None Assigned

Subsidiary Risk[s]: None Assigned

Hazchem Code: None Assigned

EPG NO: None Assigned

Poisons Schedule Number: None Assigned Toxic and Hazardous

Ingredients: None

Uses: Extreme temperature Grease.

PHYSICAL DESCRIPTION AND PROPERTIES

Colour: Black.

Appearance: Black, Tacky Semi Solid.

Form: Liquid

Boiling Point: Not Applicable.

Melting Point: Not Applicable

Vapour Pressure: mm Hg: <1.

Specific Gravity: kg/L @ 15.0°C: 1.2.

Volatiles: Not Applicable

Evaporation Rate: Not Applicable

Vapour Density: Not Applicable

Odour: Oily Odour

Solubility in Water: Nil @ 20°C

FLASH POINT

Solvent: Not Applicable

Lubricant residue: >200°C:

Flammability Limits: No Data Auto ignition

Temperature: No Data

Page 2 of 3 Nov-13

Page 2 of 3 Nov-13

INGREDIENTS

Chemical Name CAS Number Proportion

Proprietry Non Hazardous Formulation HEALTH HAZARD INFORMATION HEALTH EFFECTS:

Acute:

Swallowed: If swallowed and person is conscious give water or milk. Ingestion or subsequent vomiting may result in its aspiration which could cause pneumonitis.

Skin: Prolonged or frequent contact may cause irritation or skin cracking. Eyes: May cause moderate eye irritation.

Inhaled: Vapour or mist at concentrations exceeding ACGIH TLV may be irritating to the respiratory tract.

Chronic:

LC 50: No Data

LD 50: No Data

FIRST AID:

Swallowed: Do not induce vomiting. Aspiration of any fluid may cause lung injury (pneumonitis). Call a Doctor immediately.

Skin: Wash thoroughly with soap and water.

Eyes: Flush with water for 15 minutes, at least with eyelids open.

Inhaled: If respiratory irritation occurs move person to fresh air. If irritation continues call a Doctor.

FIRST AID FACILITIES:.

ADVICE TO DOCTOR: Refer First Aid above.

PRECAUTIONS FOR USE

Exposure Standards: The ACGIH TLV for mineral oil mists is 5mg/m³ for a

daily 8 hours exposure.

Engineering Controls: As for oil mists.

Personal Protection: Avoid prolonged or frequently repeated contact.

Wash

skin thoroughly with soap and water after contact. Use safety glasses and neoprene or nitrile rubber gloves for frequent contact.

Flammability: Product is not classed flammable. Flash Point greater than 190°C

Product may support combustion. Do not store with strong oxidants.

SAFE HANDLING INFORMATION

Storage and Transport: Store in steel or HDPE plastic drums. Store

away from strong oxidising agents.

Storage Temperature: Store in a cool dry place.

SAFE HANDLING INFORMATION CONTINUED

UN Class: None assigned

Packaging Group: None assigned

UN Number: None assigned

EPG Number: None assigned

Correct Shipping Name: Synthetic Hi-Temperature Grease.

Spills and Disposals: Mop up oil with rags or cleaning equipment.


Page 3 of 3 Nov-13

image

Destroy rags by burning when it is safe to do so. Prevent entry into sewers and waterways.

Note: Product may be slippery. Contain spilled liquid with sand and earth.

Dispose of as per local regulation - do not store or mix with strong oxidants.

DANGER OF VIOLENT REACTION OR EXPLOSION: NO

Protective Clothing; Applicable to degree of fire.

Appropriate Measures; No Data

Evacuate; Not Usually

Fire/Explosion Hazard: Not a fire hazard. Auto ignition temperature is in excess

of 450°C. Should fire occur, however, use dry chemical, foam or carbon dioxide to extinguish.

Decomposition Products: Incomplete high temperature thermal decomposition

May promote toxic fumes.

Hazchem Code: None assigned

Extinguishant: Dry chemical, foam or carbon dioxide.

OTHER INFORMATION:

315 Synthetic Hi-Temperature Grease is not expected to present environmental problems other than those associated with oil spills.

CONTACT POINT:

Mr Steve Simmonds, Mr Rob Simmonds,

Mainlube Superior Maintenance Lubricants Pty Ltd. 189-191 Botany Road Waterloo, NSW, 2017, Australia Ph 02-9310-3433. Fax 02-9310-3503.

Mob 0412-644-244, Mob 0411-243-150.

24 Hour Emergency Tel No. Above Mobile Phones Emergency Services Dial 000


We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.


315MSDS

Categories