Penetrating Lubricant Aerosol MSDS
Mainlube Superior Maintenance Lubricants Pty Ltd
14 Underwood Ave, Botany NSW, 2017
Ph 02-9700-0880. ACN No. 001 748 876 Fax 02-9700-0881.
STATEMENT OF HAZARDOUS NATURE
Hazardous According to Criteria of Worksafe Australia
MATERIAL SAFETY DATA SHEET MAINLUBE 435
MATERIAL SAFETY DATA SHEET MAINLUBE 435
Page 1 of 3 Nov-13
Page 1 of 3 Nov-13
IDENTIFICATION
Product Name: Mainlube 435
Chemical Name: Penetrating Lubricant.
Other Names: Not Applicable. Manufacturer’s Product Code: 435
UN Number: 1950
Dangerous Goods Class 2.1.
Subsidiary Risk[s]: Not Applicable..
Hazchem Code: Not Applicable.
EPG NO: Not Applicable.
Poisons Schedule Number: Not Applicable. Toxic and Hazardous
Ingredients: Expelling gas, contents under pressure
Uses: Water displacing and penetrating fluid, Lubricant, Rust preventive, Application by aerosol pray.
PHYSICAL DESCRIPTION AND PROPERTIES
Colour: Light Green.
Appearance: Bright, low viscosity Light Green Fluid.
Form: Liquid
Boiling Point: Not Available
Melting Point: Not Applicable.
Vapour Pressure: @ 25°C, mm HG:1,
Specific Gravity: kg/L @ 15.0°C: 0. 843.
Volatiles: Expelling gas.
Evaporation Rate: No Data
Vapour Density: No Data
Odour: Methyl salicylate
Solubility in Water: <0.1g/l
FLASH POINT
Lubricant residue: Non Hazardous
LPG Propellant -74°C
Solvent: >67°C (PMCC)
Lubricant residue: >200°C
Flammability Limits No Data
Auto Ignition Temperature: LPG Propellant 450°C
MATERIAL SAFETY DATA SHEET MAINLUBE 435
MATERIAL SAFETY DATA SHEET MAINLUBE 435
Page 2 of 3 Nov-13
Page 2 of 3 Nov-13
INGREDIENTS
Chemical Name | CAS Number | Proportion |
White Spirits | 64742-65-0 | 30-60%. |
Highly refined Mineral Oil | 64742-65-9 | 30-60%. |
(Does not contain PCB’s) | ||
Other non DG ingredience | Not Required | < 10% |
HEALTH HAZARD INFORMATION
HEALTH EFFECTS:
Acute:
Swallowed: Expected to be slightly toxic. May cause gastric irritation.
Skin: May cause irritation. Prolonged or repeated contact may cause irritation.
Eyes: May cause irritation.
Inhaled: Inhalation of vapours may cause drowsiness or narcosis and cause irritation to the nose and throat.
Chronic:
LC 50: No Data
LD 50: No Data
FIRST AID:
Swallowed: Do not induce vomiting. Aspiration of the fluid may cause lung injury (pneumonitis). Wash mouth out with water. Call a Doctor immediately.
Skin: Wash thoroughly with soap and water.
Eyes: Flush with water for 15 minutes, at least with eyelids open.
Inhaled: If respiratory irritation occurs move person to fresh air. If irritation continues call a Doctor.
ADVICE TO DOCTOR:
Refer First Aid above.
PRECAUTIONS FOR USE
Exposure Standards: TLV for mineral oil mists is 5 mg/m3 Engineering Controls: Mechanical exhuast with spark arrested motor
is recommended if misting occurs
Personal Protection: Not generally required. Avoid prolonged or frequently
repeated contact. Wash skin thoroughly with soap and water after contact. Preferred to use safety glasses and neoprene or nitrile rubber gloves for frequent contact.
Flammability: Flammable, avoid or naked flames and ignition sources.
MATERIAL SAFETY DATA SHEET MAINLUBE 435
MATERIAL SAFETY DATA SHEET MAINLUBE 435
Page 3 of 3 Nov-13
Page 3 of 3 Nov-13
SAFE HANDLING INFORMATION
Storage and Transport: Store away from strong oxidising agents.
Refer Dangerous Goods Class 2.1, Sub Risk 3.2
Storage Temperature: Store below 50°C
UN Class: 2.1 Aerosol 30, Flammable N.O.S
Packaging Group: III
UN Number: 1950.
EPG Number: No Data
Correct Shipping Name: 1950 Aerosol 30, Flammable N.O.S. Class 2.1
Spills and Disposals: Absorbents such as cat litter, clays and rags to clean
up spills. Dispose of absorbent in approved disposal containers.
Fire/Explosion Hazard: Contents under pressure Flammable substance.
Do not store or handle near heat, naked flame or sparks. Evacuate area. Use foam, BCF, carbon, dioxide or dry chemical extinguishers if product ignites.
Decomposition Products: Incomplete combustion may promote oxides of carbon. Hazchem Code: No Data
Extinguishant: Use foam, BCF, carbon dioxide or dry chemical extinguishers if product ignites.
FIRE/EXPLOSION HAZARD: Yes, contents under pressure, Cans may rupture
violently if involved in a fire.
Protective Clothing; Full Body Suit plus breathing equipment
Appropriate Measures; No Data.
Evacuate; Yes, Evacuate Immediate Area, risk of can rupture and propellant Ignition
CONTACT POINT:
Mr Steve Simmonds
Mainlube Superior Maintenance Lubricants Pty Ltd. 14 Underwood Ave, Botany. NSW, 2019, Australia Ph 02-9700-0880. Fax 02-9700-0881.
Mob 0412-644-244.
24 Hour Emergency Tel No. Above Mobile Phones Emergency Services Dial 000
We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.
We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.